Last updated: 10 มิ.ย. 2563 | 4413 จำนวนผู้เข้าชม |
TE-W300 Quick Guide
1. Installation Location
2. Instrument installation
Wrong installation
1. Can not be installed laterally
3. The button can not touch the device button
4. The device handle can not be parallet to the tripod handle
Proper installation
1. Snap vertion installation
2. Snap and device button to leave a gap
3. Standard working status
Press and hold the power button until the power light turns on, then the device will start. After normal start-up, the temperature measurement will begin arter 15 minutes of stabilization. P1_H represents the maximum temperature of the full screen. Adjust the rubber ring under the lens left and right to adjust the infrared image to the best effect. The standard working state is shown below:
สนใจสั่งซื้อสินค้า กล้องตรวจวัดอุณหภูมิความร้อน TE-W300 คลิกที่นี่
18 ก.ค. 2567
19 มิ.ย. 2567
3 ก.ค. 2567
26 ส.ค. 2567